15
Cleaning metal grease filters
They can be washed in the dishwasher, and need to be cleaned
whenever the
FG
sign appears on the display or at least once
every 2 months use, or more frequently if use is particularly
intensive.
Resetting the alarm signal
• Turn the Lights and the Suction motor off, then disable the
24h function, if enabled.
• Press button
E
(see the paragraph on Use).
Cleaning the Filters
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Wash the Filters without bending them, and leave them to
dry completely before replacing. (If the surface of the filter
changes colour as time goes by, this will have absolutely no
effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the handle faces forwards.
Replacing Activated Charcoal Filter
It cannot be washed or regenerated, and must be changed when
the
FC
symbol on the display appears, or at least once every 4
months. The Alarm signal, if it has been activated, only appears
when the Suction motor is turned on.
Resetting the alarm signal
• Turn the Lights and the Suction motor off, then disable the
24h function, if enabled.
• Press button
E
(see the paragraph on Use).
Cleaning the Filters
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
•
Remove the saturated charcoal filter by releasing the fixing
hooks.
•
Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.
Lighting unit
• LED lights must be replaced by Faber factory authorized
service.
Summary of Contents for BELA30SS600-B
