11
6"
Rear
1 MOTOR RANGEHOOD REAR INFORMATION
Only for the first installation
For a rear ducting installation
the blower bracket needs to be
unsecured by first removing the 12
screws as shown.
Once the screws are removed,
extract it from the body of the Hood
and position it so the transition
opening is facing to the rear wall
(from the back remove and rotate
180 degrees to the left, and then flip
it back 90 degrees as shown in the
diagram).
Once the blower bracket is in place
reinstall the 12 screws to fasten the
bracket to the Hood body.
1
1 MOTOR RANGEHOOD REAR DUCTED INSTALLATION
180°
90°
