22
This page needs to be inserted
after Page 9 and before Page 10
Add the new
kit
:DUCTGRT42
–(42“)
RECIRCULATION INSTRUCTIONS
This page needs to be inserted
after Page 9 and before Page 10
Add the new
kit
:DUCTGRT42
–(42“)
Note: It is recommended that pro
fessional style cooking always be
vented to the outside; for recirculat
ing installations, some duct work is
required to exhaust the unit out of
the cabinet.
Note: recommended for 600 CFM
version only
RECIRCULATING INSTALLATIONS
For recirculating installations, Charcoal Filters are necessary. Remove all grease filters
and set aside. Attach one charcoal filter to each end of the blower. Each charcoal filter
attaches to the grid on the side of the blower. Rotate the filter clockwise to install and
counterclockwise to remove (FIGURE 3C). Replace all grease filters.
Some duct work must be installed to exhaust the rangehood back into the kitchen, either
at the top of the cabinet (FIGURE 3A) or at the face or side of the soffit (FIGURE 3B).
Install at least 15" of metal duct (fig.3A and 3B) at the air exit. Run the duct vertically and
secure it at the opening cut out at the top or side of the cabinet or soffit. Installation
upper
cabinet
upper
cabinet
rangehood
rangehood
open space
enclosed soffit
cooking surface
cooking surface
Required Activated Charcoal Filter Accessory - sku
# - FILTER1
Long Lasting Activated Charcoal Filter Accessory -
sku # FILTER1LL
(purchased separately)
