Page
18
of
39
CAS1000 – CONTROLS IDENTIFICATION
The CAS1000 has two sides;
Master Side: which commands the overall operation of the product
Slave Side: which follows the operation commands from the Master side
Both sides have independent Flame Effect and Sound controls
CAS1000 ON BOARD CONTROLS
x
The Bluetooth Receiver is connected to the Master side via a jack. See page 19 and 20.
x
The On Board Controls are different for either side.
The Master side has the seven buttons as seen in CAS500 product.
The Slave side also has seven buttons; however, the first two buttons contain no icons, and
these should only be during test mode by trained personnel. For more details, see from
page 29.
CAS1000 BLUETOOTH RECEIVER
CAS1000 REMOTE CONTROL
On board controls (Slave Side)
On board controls (Master Side)
Flame Controls (Master Side)
Flame Controls (Slave Side)
Fl
Fla
Flame Controls (Master Side)
Flame Controls (Slave Side)
F
Fl
The CAS1000 bluetooth receiver contains six
buttons, in contrast to the four button
receiver used in the CAS500. The additional
two buttons control the flame effect on the
slave side of the product. See pages 19 and
20 for more details.
The CAS1000 Remote Control also contains
six buttons. Similar to the CAS1000 Bluetooth
Receiver, the additional two buttons control
the flame effect on the slave side of the
product. See pages 22 and 23 for more
details.
Summary of Contents for CAS500
Page 1: ......