1 3
13 Support list
NO
YES
NO
NO
NO
YES
NO
YES
NO
- Learn a new code for remote.
- Battery remote.
- Battery receiver.
- Faulty adapter.
- Faulty receiver.
Light the pilot flame with
the remote, beep every
second?
No beep
Low battery
receiver.
- See inst. manual.
- 1x 9V Alkaline.
- 4x 1.5V AA Alkaline.
- Replace 6V adapter.
- Replace the receiver.
Clearly audible click
from the solenoid in
the gas valve?
- HT lead and sparking plug.
- Check the distance between
sparking plug and pilot top?
- Insulate the HT lead.
- Cut of a small piece from the
sparking plug.
- Tie-wraps removed?
- Cable is free from any metal parts?
4x 1.5V AA Alkaline
- Thermocouple circuit is
interrupted, check:
- 8 wire cable from receiver
to the gas valve.
- If the wire on the bottom
of the gas valve is not
broken or stuck and makes
a ground contact.
- Motor gas valve doesn't
work.
- Micro switch on gas valve
doesn't work.
3 short
beep's
1 long
beep
Faulty solenoid gas valve.
Replace the gas
valve.
Replace faulty
parts.
Every second a spark?
Check:
Pilot lights?
- Check power supply of the receiver.
- Air in the gas tube.
- Clean the pilot burner, primary air opening, flexible gas tube
and pilot injector.
- Check inlet pressure?
- Faulty solenoid?
(Clearly audible click from the solenoid in the gas valve)
I n s t a l l a t i o n I n s t r u c t i o n s
Summary of Contents for Concept III-700
