Faber NOPR30SS600, Installation Instructions Manual

16

22

21

Replace the metal grease filters 

removed previously.

Direct Connect Wiring Box 

Accessory sku # WIREBOX 

(purchased separately)

Created by 

-

Denomination

-

Lang 

EN

Sheet 

1/1

Modif.by 

Approved by 

Approval date 

Doc. status 

Drawing N.

NEW_DRAWING_BOX

Rev

01

ELECTRICAL  INSTALLATION WITH CONNECTION 

CABLE

GROUNDING INSTRUCTIONS This appliance must 

be grounded. In the event of an electrical short circuit, 

grounding reduces the risk of electric shock by providing 

an escape wire for the electric current. This appliance 

is equipped with a cord having a grounding wire with a 

grounding plug. The plug must be plugged into an outlet 

that is properly installed and grounded.

WARNING - Improper grounding can result in a risk of 

electric shock.

Consult a qualified electrician if the grounding instructions 

are not completely understood, or if doubt exists as to 

whether the appliance is properly grounded.

Do not use an extension cord. If the power supply cord 

is too short, have a qualified electrician install an outlet 

near the appliance.

ELECTRICAL  INSTALLATION WITH 

OPTIONAL WIRING BOX

For Permanent wiring Installation-Use only 

with Listed rangehood Wiring Box kit 

sku # WIREBOX, manufactured by Faber.

Max. 33 

7/16

”

For Non-Ducted Recirculation 

Option

Required Activated Charcoal Filter 

Accessory - sku # - FILTER1 

(purchased separately)

Attach each 

charcoal 

filter to the 

black grid on 

each side of 

the blower. 

Press the 

charcoal 

filter tightly 

to the black 

grid on the blower side and rotate the filter 

clockwise (towards the front of the hood) until it 

locks into place. Turn counterclockwise (towards 

the back of the hood) to remove.

20