PAGE 8
OUTSIDE WALL MOUNT
ROOF MOUNT
FIGURE 1
Hood
Roof
10” Elbow
10” Duct
Hood
10” Elbow
Outside
Wall
Choose your installation - Roof or Wall Installation
You can be killed or seriously injured if you don’t
follow instructions.
Excessive Weight Hazard
Use two or more people to move and install a
remote blower.
Failure to do so can result in back or
other injury.
WARNING
Choosing the Proper Location
1. Install the blower in a location that allows it to be accessed for service if necessary. There
must be enough room to remove the top cover.
2. The mounting location needs to allow for a cutout below the unit for ducting and electrical
connections to fit through the wall or roof and into the range hood.
3. Avoid installing the blower in a location where the exhaust exit could be exposed to rain
blowing into internal components. The exhaust may be shielded if absolutely necessary, without
obstructing airflow.
4. When mounted in an exposed area the blower has be to shielded or the cover needs to be
sealed to prevent accumulation of water. When installing in horizontal applications
(SEE FIGURE 7)
, the exhaust must be pointing in the same direction as prevailing winds. The
discharge must point down in a vertical mounting applications.
