BARBARA I TOMASZ FABICH
Start by placing the elements of table legs (3) to the outside. Attach them to the
horizontal boards supporting the seat (2) and to the boards supporting the top (4).
Screw all componets (6,7,8).
1.
2.
3.
4.
Screw two pieces of boards (1) on either side of the horizontal elements supporting
the seat (9).
Finally, screw the crossbars (5) to the horizontal bottom boards (2) and to the upper
one (1), which is a part of the table top.
Screw two external boards as a table top (1) to the upper horizontal boards (4). Attach
the remaining boards (1) in equal distance from each other (6 items). The width of the top
is determined by the upper horizontal boards.
Comments
When screwing leg parts (3) with horizontal elements (2) and (4) attention should be paid
to placing the phased sides of the boards to the outside, which greatly affects the
aesthetic appearance of the table.
Elements of the seat and table top (1) should stick out approx. 10 cm outwards after
matching them with the horizontal elements (2) and (4).
ASSEMBLY MANUAL
PICNIC TABLE 40
2
