background image

14

desired time using the [

+

] and [

-

keys 

within 6 seconds. Wait for 5 seconds 

for the automatic confirmation. The time countdown will be shown on the timer 

display. 

When time elapses, the display will show a flashing ‘‘000’’ and an acoustic signal 

will be heard. Press the [

+

] or [

-

key

 on the timer area to stop the signals.

To disable the timer of a cooking zone press repeatedly and simoultaneously 

the [

+

] and [

-

keys

 on the timer area until the clock symbol lights up beside the 

display of the desired cooking zone, then bring the timer value back to ‘‘000’’ by 

using the [

-

]

 key. 

Wait for 5 seconds for the automatic confirmation.The clock 

symbol beside the cooking zone display goes off. 

Pause

When at least one cooking zone is operating it is possible to momentaneously 

pause the appliance switching off the cooking zones.

To enable this function press the 

Pause/recall key

. The relative led lights up 

and all the cooking zone displays show the symbol ‘‘

II

’’. Previously programmed 

timers will be stopped. 

The pause can last for maximum 

10 minutes

. If this status is not terminated 

within this time the appliance switches off. 

To disable the Pause function press the 

Pause/recall key

 and slide right on the 

slidebar within 10 seconds. 

Recall

When the appliance has been switched off by mistake it is possible to quickly 

recall the previously active settings by pressing the 

Power key

 within 6 

seconds, then pressing the 

Pause/recall key

 within another 6 seconds. If the 

recall function is available the relative led will be flashing when the appliance is 

switched on again.

Control lock

Controls can be locked in order to prevent any risk of unintentional changes to 

the settings (children, cleaning operations, etc.). To activate this function press 

the 

Control Lock key

. The relative led will light up. The function remains active 

when the appliance is switched off and on again. 

To disable the Control Lock function simply press the 

Control Lock key. 

The 

relative led will go off.

Child safety lock

This function serves the purpose of preventing children from switching on the 

appliance even accidentally or intentionally.

The Child safety lock can only be activated with all the cooking zones off. 

To activate this function press simoultaneously the 

Control lock key

 and 

the 

Pause/Recall key

, then again the Control Lock key. The symbol ‘‘

L

’’ will 

Using the Cooking area

ENGLISH

Summary of Contents for SOCIALE






















Reviews: