6. Place your child in the restraint
Original User Manual
–
FableKids Car Seat
1. See the graphic in D from step 1-step 5. for installing your child restraint on car seat.
2. Press the red release button on buckle, unfasten the buckle connector 1 & 2.
3. Lift up the harness straps and lay them flat on the back of restraint.
4. Place your child in restraint.
•
Note: Do not place your child in a sleeping bag, blanket or other bulky wrapping before
putting child in the restraint. The shoulder straps will not fit snugly, and the child won’ t be
safe.
5.
Put the harness straps on each side of child’ s shoulder.
•
Remark: A newborn baby will need extra support around the head and body. Please don’ t
remove the cushion if you are going to use it of your newborn baby or baby less than 7
months.
•
PS: the cushion is alternative item, please asking sell agent regarding to this extra selection.
6.
Join the two buckle connectors, passing the left “1” under the right “2” ,and inserting them
both into the buckle until you hear a “click” signifying the buckle is locked.
7. Pull the harness adjuster lock to the position you desired.
8. Check that harness straps are snug with just enough room to insert one finger between
child's Chest and harness straps.
•
Note: check that the buckle is secured by attempting to pull the above and below part to
remove the connectors.
6
