background image

5BB0800002  S4  41/20

III

?

!

Dear customer,
Thank you for choosing our bathroom furniture. If handled properly, you will be able to enjoy this product for a long time.
Please note that the product must be checked for any transport damage before assembly. In particular, the electrical cables and components must 
be checked! In the event of a complaint, please retain the packaging. No liability is assumed for damage to products which have already been 
assembled, products assembled by staff who are not experts in the field and damage caused by improper handling!

1. Our furniture is suitable for use in private households, which includes the bathroom area in enclosed living spaces. Our furniture is not suitable 
for commercial use.
2. Keep packaging materials and small parts, such as batteries, out of the reach of children.
3. Only clean furniture and mirrors with water and a clean, damp cloth.
4. Please note the manufacturer’s instructions regarding microfibre cloths. Unsuitable microfibre cloths may cause serious damage to the facades 
and mirror surfaces.
5. Do not use any cleaning products (glass cleaners) which contain alcohol, abrasives, chemicals or strong detergents.
6. Always wipe the furniture to dry it in order to prevent any damage to the material (moisture expansion) or the mirror coating (spots) resulting from 
standing water.
7. Do not use steam cleaners. This leads to moisture expansion and causes serious damage to the furniture.
8. Seal all connection areas of the covering plates to other cabinets and wall areas, as well as to the wash basin, with silicone or other suitable 
sealants.
9. Protect your furniture in the bath/shower area using a shower screen. Damage caused by excess moisture is excluded from the warranty. Protect 
furniture with electrical installations against water splashes!
10. The bathroom furniture is suitable for a normal bathroom environment. Temporary air humidity of 90% is included (no sauna use). Ensure that 
there is sufficient ventilation and drying in the bathroom, in particular after showering or bathing.
11. Hooks and dowels provided with the product are only suitable for MZ20 solid brick walls, HLZ 20 hollow bricks or B25 concrete.

Disconnect the power supply before changing the bulb. In the 
event of a fixed installation, the supply circuit must be fitted 
with an isolating unit (e.g. circuit breaker).

Double insulated, protection class I, devices with 
earth wire connection (yellow/green).

M

M

Suitable for installation in furniture, but not with surfaces with 
normal flammability levels.

Double insulated, protection class II, devices without 
earth wire connection.
Protective insulation, protection class III, device without 
protective conductor connection,
protective extra-low voltage 

 50V AC, 

 120V DC

III

Electrical products may not be disposed of with domestic 
waste. Dispose of these products at suitable recycling 
facilities. Ask your local authority or disposal company about 
suitable recycling options.

No electrical cables, supply cables or waste pipelines may be 
located in the fixing area.

1. Ensure that the cabinet suspension is positioned 
properly on the hook and/or suspension bar.

2. In order to be able to ensure safety during 
assembly/use, the cabinet must be firmly secured to 
the wall.

?

!

Assembly, care and safety instructions:

Batteries may not be disposed of with domestic waste. Dispo-
se of these products at suitable recycling facilities. Ask your 
local authority or disposal company about suitable recycling 
options.

Suspension of the furniture

1. Caution! Risk of electric shock: Touching live parts may cause severe injury or even death. Connection, decommissioning and repair processes may 
only be carried out by a qualified electrician in compliance with VDE 0100-701, IEC 60364-7-701! Always use the connection accessories which are 
provided.
2. Should there be no ground fault circuit interrupter on site, we recommend using a circuit breaker with 30 mA to increase the level of personal safety.
The rated fault current is to be provided for in accordance with EN 61008.
3. The product may not be operated without supervision. Parents must supervise their children during operation.
4. In the event of storms or longer periods of disuse, disconnect the transformer box/operating unit from the power supply. This enables damage caused 
by lightning or voltage surges to be prevented.
5. A defective transformer box must be decommissioned; it may not be repaired and must be replaced with a new one. A damaged external cable may 
only be replaced by a professional.
6. When changing light sources, it must be ensured that the data for the max. lamp wattage (W) and voltage (V) corresponds to the data for the 
transformer/light.
7. Avoid longer periods of direct eye contact with the LED light source as this may damage the eyes.
8. Batteries must not be dismantled, short-circuited or thrown into fire. Never try to recharge non-rechargeable batteries. This is associated with a risk 
of explosion! Remove the batteries when you are not using the device for an extended period of time
in order to prevent damage caused by leakage. Batteries which have leaked or been damaged may cause acid burns in the event of contact with the 
skin. Protective gloves must therefore be used when handling damaged batteries.

Electrified furniture

Proper use and daily use

Caution! High risk of breakage: In the event that you ship this product, please package the item in exactly the same way as it was packaged when 
you received it. Use the original packaging with filling and padding material. If you do not use the original packaging properly, we will have to charge 
you for any transport damage which is incurred!

              

0mm!

0mm!

Summary of Contents for 84112





















Reviews: