1/4 NPT
Ø 10 mm
3/8 "
CE DECLARATION OF CONFORMITY
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - 91 420 MORANGIS - FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT
V.CE100F
– FACOM Ø 100 MM EXTENDED CUT-OFF TOOL
- IS IN CONFORMITY WITH THE
«MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD
EN
ISO 11148-7: 2012
The undersigned is responsible for compilation of the technical fi le and makes this declaration on behalf of Facom.
20.03.2016
Director Engineering
PLACING THE MACHINE IN SERVICE
EMERGENCY
GATE VALVE
* k = measurement uncertainty in dB ** k = measurement uncertainty in m/s²
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit:
FACOM N.580
.
Every eight hours’ operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm
3
through the machine’s inlet connection.
Markus Rompel
Model
Deburring
wheel
Motor power
rating
Center hole
diameter
max. wheel
wide
Noise level
Vibrations level
m/s
2
Pressure dB(A)
Power dB(A)
Pressure dB(C)
mm
kW
mm
mm
k*
k*
k*
k**
V.CE100F
Ø 100
0,7
max. 10
max. 2
88
3
99
3
130
3
2,4
1,44
Model
Rated speed
Air
consumption
Working
pressure
Weight
Dimensions
rpm
l/min
bar
kg
mm
V.CE100F
17000
113
6,2
1,74
400 x114 x 71
NEVER USE THE ANGLE CUT-OFF TOOL WITHOUT THE SAFETY GUARD
➠
➠
Ø 22,23 mm
?
10 mm
NU-V.CE100F_0616.indd 8
22/06/2016 14:37:05
