background image

 

 

10 

www.factorelectronics.com 

info@factorelectronics.com 

The warranty does not cover replacement or repair necessitated by loss or damage from any 

cause beyond the control of Factor Electronics, such as lightning or other natural and weather 

related events or wartime environments.   

The  warranty  does  not  cover  any  labor  involved  in  the  removal  and  or  reinstallation  of 

warranted equipment or parts on site, or any labor required to diagnose the necessity for repair 

or replacement.   

The warranty excludes any responsibility by Factor Electronics for incidental or consequential 

damages  arising from  the  use  of  the  equipment  or  products,  or for  any inability to  use  them 

either separate from or in combination with any other equipment or products.   

A  fixed  charge  established  for  each  product  will  be  imposed  for  all  equipment  returned  for 

warranty repair where Factor Electronics cannot identify the cause of the reported failure. 

Exclusive Remedies 

Factor Electronics

’s warranty, as stated is in lieu of all other warranties, expressed, implied, or 

statutory,  including  those  of  merchantability  and  fitness  for  a  particular  purpose.  The  buyer 

shall  pass  on  to  any  purchaser,  lessee,  or  other  user  of  Factor  Electronics

’s  products,  the 

aforementioned warranty, and shall indemnify and hold harmless Factor Electronics from any 

claims or liability of such purchaser, lessee, or user based upon allegations that the buyer, its 

agents,  or  employees  have  made  additional  warranties  or  representations  as  to  product 

preference or use.   

The  remedies  provided  herein  are  the  buyer’s  sole  and  exclusive  remedies.    Factor 

Electronics  shall  not  be  liable  for  any  direct,  indirect,  special,  incidental,  or  consequential 

damages, whether based on contract, tort, or any other legal remedy.   

RMA Policy 

When returning product to Factor Electronics for any reason, the customer should fill out the 

official  RMA  form  to  obtain  a  RMA  number.  Without  the  permission  or  approval,  Factor 

Electronics will be no responsible for any return. 

 

This 

can 

be 

initiated 

by 

emailing 

or 

calling 

your 

related 

sales 

person 

www.info@factorelectronics.com

 PH:778-800-1918.   

 

All requests are processed within 48 hours.  

Summary of Contents for HD50-4K-BALUN













Reviews: