4
www.factorelectronics.com
HD100BaseT-Balun User Manual
Factor Electronics
Introduction
The HD100BASET-BALUN(TX) HD100BaseT-Balun (RX) is an HDB aseT 2.0 HDMI Extender
featured ARC and 4 Port Ethernet Switch. It transmits 1080p@60Hz via single Cat5e up to 100
meters and 4K@60Hz (4:2:0) to 90 meters. Bi-directional IR, RS232 and Ethernet can also be
transmitted over the same Cat5e/ Cat6 cable. With support of POH, only one power supply is
needed at either TX or RX side. Toslink input receiver can work with legacy products for audio
return to audio surround receiver. Besides, audio from ARC can also be extracted via both
Toslink and L/R at TX side. The extender can also be used stand-alone as an Audio extender.
Excellent performance for cont rol and signal transmission makes the HD100Bas eT-Balun is
deal in the custom installation industry, IT computer space, signal monitoring, big screen
displays, conference systems, television broadcast, education, banking and security
institutions etc.
Features
Audio Return Channel (ARC) supported backwards Toslink input.
Audio extractor for ARC at TX side via Toslink and L/R.
Supports HDMI 1.4 1080p@60Hz and HDMI 2.0 4K@60Hz (4:2:0).
HDCP 2.2/HDCP 1.X and DVI compliant
With built-in 4 port Ethernet Switch.
With HDMI loop out at TX unit.
Supports 1080p@60Hz or VESA: 1920x1200@60Hz video transmission up to 100m/328ft,
and 4K@60Hz (4:2:0) to 90m/295ft.
Transmission distance for ARC up to 100m using STP (TE CONNECTIVITY 219420-2).
Dolby TrueHD and DTS-HD master audio pass through HDMI output
Bi-Directional IR, RS232 and Ethernet pass through.
POH (Power over HDBaseT) supported, only one power supply needed at either
Transmitter or Receiver side.
With ESD Protection.
Note:
The POH function is designed for powering compatible TX or RX unit of Factor Electronics
ONLY.
DO NOT
connect it with any third party Power Over Ethernet devices. Damage may
result.