1
SQ-6100 IrDA
UHF Handheld Microphone
Parts and functions
1
Cartridge
2
Power switch
3
LCD
4
Setting button
5
Menu button
6
IrDA synchronizing button
7
Battery compartment
8
Color cap
9
Battery power LED
10
Charging port
Battery installation & indicator
●
►
○
●
When the transmitter is switched ON, a blue
LED will blink once to denote the batteries
installed are in good condition.
If the LED remains illuminated, it means the
batteries are weak and require replacement.
This transmitter requires 2 x AA batteries to
operate.
To install, remove the battery cover and slide
the batteries into the battery compartment &
replace the battery cover.
Note
: Batteries contain a corrosive acid that may leak and damage the microphone when stored for a long
period. Batteries should be removed from the microphone before storing without use for more than 4 weeks.
Channel setting
1
Use
MENU
button to go to the
CHANNEL
｜
FREQUENCY page.
2
Press and hold the
SET
button for 3
seconds, then the upper-right channel
number will flash to allow changes to be
made.
3
Press
SET
/
MENU
buttons to change the
channel number. The corresponding
frequency will change accordingly.
4
3 seconds after selecting a channel, it will
be automatically saved.
9
1
2
4
5
6
7
8
3
10
