info@factorelectronics.com
www.factorelectronics.com
Rear Panel Operations and Connections
SEL CONTACTS
-
Shorting the SEL terminals using a switch or
external contact closure will combine the pre-amp signals in both the
amplifiers and multiple amplifiers. We recommend using the V-RMC
wall plate switch, which provides room combining for up to five
amplifiers. The amplifiers will operate as one larger amplifier. It is
possible to connect multiple amplifiers to create a room combining
system. When connecting multiple amplifiers together you may need
to adjust the volume levels on the individual amplifiers to create a
well-balanced mix.
NOTE:
To combine two or more amplifiers the SEL contacts must be
shorted on each amplifier you wish to combine.
EXAMPLE:
Connect the bridge terminals of amp 1 to amp 2. Short the
SEL contacts on amp 1. The amps will not combine. Short the SEL
contacts on both amps 1 & 2 and the amps will combine. Any source
that is connected to either amp will broadcast on both amps.
V-RMC
We recommend using the factor Electronics
V-RMC to short the SEL contacts on Factor Electronics
Amplifiers. The V-RMC provides five latching switches
That can be used to short the SEL contacts or the MUTE
contacts.
