info@factorelectronics.com
www.factorelectronics.com
Rear Panel Operations and Connections
NOTE: Rear Panel color coding
GREEN = Input
RED = Output
Input 1
Input 1 is a priority input. This input functions the same as
the other input channels but offers some added features suitable for
paging microphones. Priority means “override”. Simply stated the
microphone or line level signal will override all other inputs.
RCA
UNBALANCED
- These jacks accept line level signals from CD's,
DVD's, tuners etc. This is an unbalanced input that sums the signal to
mono. The INPUT LEVEL knob does not affect the RCA input level.
BALANCED -
This is a balanced three-pin detachable terminal block
connector that will accept microphone or line level sources. You can
also connect an unbalanced source by connecting the HOT to + and
connecting the COLD or (return) to G terminal. The INPUT LEVEL
control affects the input level for the terminal block input jack.
INPUT LEVEL
– This rotary control adjusts the input level for the
terminal block connector only. Use this to match the correct input level
based on the signal strength of the device connected. A good starting
point is the 12:00 position. If you hear distortion turn the control
counter clockwise. Turn this control clockwise to increase the input
level.
