CONTROL FUNCTIONS
1. Serial Number Plate: Used to identify the date of manufacture & customer information.
2. Main Power Switch: Turns the machine on and off.
3. Speed Control Knob: Controls the drive speed on the machine. Rotate (clockwise) to increase speed.
4. Reverse Switch: Depress down to drive in reverse. Reverse is set at 50% speed for safety.
5. LCD: Contains Battery Gauge, (3) Hour Meters, Down Pressure Gauge, Operation Icons.
6. Recharge Plug: Use only 24-V/36-amp charger provided with the machine.
7. LCD Menu Select: Changes the LCD from screen #1 to #2 or #3.
8. Brush Pressure Switch: Controls brush pressure (1-5) 5 being the highest.
9. Brush Up/Down Switch: Brushes will only run when in the down position. Raise to transport only.
10. Solution Control Knob: Controls the solution flow rate, when the solution switch is on.
11. Drive Control Buttons: Depress either of the (2) switches to drive forward, and release to stop.
12. Handle Bar: Use both hands to operate at all times.
13. Squeegee Lift Lever: Rotate to the right to lower squeegee & engage the vacuum motor.
14. Vacuum Motor Cover: Mounts Vacuum Motor & Seals to hose.
15. Recovery Tank Access: Used to flush out buildup that may accumulate inside of tank.
16. Solution Tank: Holds 30 gallons of cleaning detergent. Max temp is 140 F or 60 C.
17. Recovery Tank: Holds 30 gallons of dirty recovery water. Max temp is 140 F or 60 C.
18. Rear Casters: Twin casters for stability.
19. Drive Wheels: Provide propulsion for machine.
20. Brush Shrouds: Protect scrub brushes from damage, and control splashing. Open to change brushes.
21. Solution Fill Door: Used to refill the solution tank with cleaning solutions.
22. Rec. Drain Hose used to completely drain dirty recovery water from tank. Always flush out completely.
23. Sol. Drain Hose used to drain cleaning solution, and as a level indicator of remaining solution onboard.
24. Backup Wheels.
25. Vacuum Hose: Vacuumizes squeegee. Keep free and clear of blockage for optimum performance.
26. Squeegee: Recovers dirty water from floor. Keep clean and replace blades when worn.
27. Recovery Tank Cleanout Door: Provides access to Recovery Tank floor for sludge removal.
28. Wall Rollers: Protects machine and walls from some collision damage.
29. Adjustment Knob: Adjusts pitch of squeegee. The deflection should be even across entire blade.
30. Corner Wheels.
PAGE 7
