PILOT-OP-EN
- 17 -
ADJUST ORBITZ SHROUD WIPERS:
1. For Shroud rubber adjustments, loosen the Nylok Nuts
(A)
on the back of the Shrouds
(SEE BELOW)
.
2. To adjust rubber to the desired height, just slide the
curtain up or down in the slits and tighten screws.
3. Reattach the Shroud to the Scrubdeck by sliding back
on and tightening the Star Knobs.
ADJUST ORBITZ SHROUDS:
1. For Shroud adjustments, loosen the Start Knobs
(B)
and remove Shroud
(C)
(SEE BELOW)
.
2. Spin the Red Shroud Adjustment Knobs
(D)
up or
down on the Shroud Support Bolt
(SEE BELOW)
.
3. Once adjusted to the proper height, tighten Shrouds
(C)
back in place.
B
B
C
A
D
