Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and dispatched ready
for installation. Replacement products or components thereof should be ordered direct from Factory Furniture Ltd
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd
General Specifications
Table
Bench
Metric
length 2000mm | width 760mm | height 750mm*
Metric
length 2000mm | width 295mm | height 450mm*
Imperial
length 6’ 6½” | width 2’ 6” | height 2’ 5½”*
Imperial
length 6’ 6½” | width 11½” | height 1’ 5½”*
*Not inc300mm below ground level for sub-surface root fix
*Not inc300mm below ground level for sub-surface root fix
Fixing Centres
1200mm (3’ 11”)
Fixing Centres
1200mm (3’ 11”)
Approx Weight
106kg
Approx Weight
44kg
Picnic Set (Combined)
Metric
length 2000mm | width 1615mm | height 750mm*
Imperial
length 6’ 6½” | width 5‘ 3½” | height 2’ 5½”*
* Not inc300mm below ground level for sub-surface root fix
Fixing Centres
1200mm (3’ 11”) x 1320mm (4’ 4”)
Approx Combined Weight
194kg
Detailed Material & Finish Specifications
Table & Bench Slats
• Manufactured from FSC
®
certified hardwood
• Profiled and left untreated as standard
(oil or microporous woodstain treatment available on request)
• Supported on and bolted to legs
Legs
• Manufactured from stainless steel - satin polished
• Stainless steel plate at top of each base for fixing to table / bench top
• Stainless steel ‘T‘ bar at foot of each base for better anchorage in foundation pad
•
Root fixed 300mm (1’) below ground level
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of timber table/bench slats and frame - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that table and benches are firmly secured to the ground
Specific Maintenance Details
FSC Timber
Clean with a stiff brush once per year, especially in more exposed locations, in order to prevent a verdigris type build up on
the timber surface. Ideally this should be completed in early spring. During the cleaning stage, all exposed timber surfaces
should be inspected for splits and splinters. Any splinters and graffiti should be removed and the surface sanded with 100
grit sandpaper in order to remove any uneven / sharp edges or surfaces.
During the first few months after installation the tannin naturally occurring in the timber may leach out and cause a brown
staining on the bases. This may be removed with a light solution of household bleach and water.
Stainless Steel
(polished stainless steel only)
Clean as required, but at least every three months, using a stainless steel polish and a lint free cloth. To remove ground in
dirt, a stainless steel finishing pad may be required.
2
SCROLL PICNIC SET specification
)6&
&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
