ORDINARY MAINTENANCE
It is recommended that the operators and all the moving parts be inspected periodically (every 2-3 months or whenever
necessary) and the inner rolled screw shaft lubricated with some grease from underneath the operator.
it is also advised that the gate hinges and pivots be periodically lubricated as well.
Remove any possible obstacles and hindrances, the gates must be able to move freely in open and close directions.
Pic. 17
Pic. 18
Ceck that photocells are free
from obstacles or
disturbance.
Re-align if necessary
Gate fixing
pivot
On the inner
rolled screw shaft
Gate post
fixing pivot
electromechanical operator for swinging gates
DARDO 424
DARDO 424
English
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
25
