Pic. 7
Pic. 8
M8 bolts suitable to the
materials the gate post or wall
are made of
Respect distance A as per Pic.4 or Pic.5
!
55 mm
!
FIXING BRACKETS PREPARATION AND FASTENING
IMPORTANT: before fastening the mount brackets, consider that they are 55 mm vertically offset: the front fixing is
55 mm lower than the rear fixing to the gate post (Pic. 7).
First fixing is the front one to the gate by using a strengthing plate (according to C distance of Pic. 4 or Pic. 5, in the way as
indicated in Pic. 6).
Pic. 6
!
Strengthening
patch plate
(not included)
!
Non metallic
gates
Get ready the rear fixing and fasten it to the gate post, in respect of the installation geometry (Pic. 4 or Pic. 5), and as indicated
in Pic. 8.
electromechanical operator for swinging gates
DARDO 424
DARDO 424
English
20
