OVERALL DIMENSIONS
815
ø 275
480
ø 275
500 mm
Drwg. No.
6450
GB
GASPO 252
- semiautomatic - with gas springs
ø 200
thickness 4 mm
INSTRUCTIONS
GASPO 252
BOLLARD FITTING INTO THE ENCLOSURE
GASPO 252 FUNCTIONING
To facilitate the fitting operations into the
enclosure, we advise to bring the bollard to
standing out position. Then sink the assembly
into the enclosure and fixing it by the M10x20
TSEI SS steel screws.
Lowering the bollard:
- Insert the shaped spanner into the lock under the bollard cover.
- To
unlock
the bollard, turn the spanner
anticlockwise
and lower it completely.
- When the bollard is completely lowered, to
lock
it in down position and be allowed to
remove the spanner
, turn
clockwise
.
Resetting the bollard:
carry out the previous operations in reverse order: insert the spanner, turn it
anticlockwise
to
unlock
and lift the bollard, then turn
clockwise
to
lock
the post and
be allowed to
remove the spanner.
Bollard finish
RAL 7016 anthracite grey
Complete Gaspo 252 weight
63 kg
Weight of housing and plates
23 kg
Impact resistance
[A]
30.000
J
Breakout resistance
[A]
160.000
J
[A] Various factors, such as the compaction index, soil permeability coefficient and kind
of concrete may reduce the values indicated even significantly.
1
2
3
l'apricance
llo
FADINI
l'apricance
llo
FADINI
l'apricance
llo
FADINI
