VISY-ICI 485
Page 5/11
2.2
Assembly
The VISY-ICI 485 is designed to be mounted on the DIN rail only.
Hold the module carrier of the VISY-ICI 485 at an angle to the rail and fit the mounting
foot onto the rail in such a way that one side of the module carrier is secured. Then press
the other side of the module carrier onto the rail until this side snaps into place and the
module carrier is firmly locked.
Figure 1: Assembly
The VISY-ICI 485 can be used only in conjunction with the VI-...
interface card
(version VI-4 or later).
Mount the VISY-ICI 485 to the left of the VI-… interface card on the DIN
rail.
The module carrier can be released from the DIN rail only by prising out
the mounting foot with a screwdriver.
VISY-ICI 485
VI-4 interface card
Summary of Contents for VISY-ICI 485
Page 2: ...Page 2 11 VISY ICI 485...
Page 11: ......
