VISY-View Printer
Page 5/8
4
Control panel
The control panel has two indicator LEDs and two buttons.
Figure 1: Control panel
The indicator LEDs provide information about the printer conditions. Under normal
circumstances the POWER LED should be constantly on and the ERROR LED should be off.
The buttons are used to perform a manual paper feeding and to change between online
and offline mode.
4.1
POWER LED (green)
•
The POWER LED is on, when power supply is on and the printer mode is online.
•
The POWER LED is blinking, when power supply is on and printer mode is offline.
4.2
ERROR LED (red)
•
The ERROR LED is blinking slowly, when only a small rest of paper is available.
•
The ERROR LED is blinking fast, when the paper is out.
4.3
FEED button
The FEED button is used for the manual paper transport. The button only works if the
printer is set into the offline mode. Press the ON LINE button to change between offline
and online mode. In the offline mode the POWER LED blinks.
•
Press the FEED button once to advance the paper transport one line.
•
Press the FEED button constantly to advance the paper transport permanently.
4.4
ON LINE button
The printer must be in online mode to be able to receive data from the VISY-View. If the
printer is in offline mode (POWER LED is blinking), press the ON LINE button once to
change the mode into online. If the printer is in online mode, the POWER LED lights up
permanently.
