Dailyuse
Step 1: The battery can be charged on and off the bike. The charging port is at the tail of the
battery.
Step2: Inset the charging port of the charger to the connecting charge port of the battery
(please make sure the charge port is dry).
Step 3: When the charger indicator turns red, it is charging; when it turns green, it is fully
charged.After fully charged, please stop charging, as long-term charge will affect the service
life of the battery.
Step 4: After charging, please cover the charging port in case water in.
Charging Method
Safety tips when charging
Please charge at least 5 hours before first use.
In order to maximum extend the battery life, please charge it every one month or two days after riding it. Please charge it under proper temperature and
environment.
Not charging timely may cause battery damage.As time goes by, battery capacity will gradually run out, and eventually lead to battery over-discharge.
Please use the battery, charger and cable provided by original manufacturer, to avoid dangers caused by battery overcharge .
Please ensure correct connection of the charger and the cable, as well as enough ventilation environment.
Please use it under dry condition. It is NOT allowed to make the charger or cable connect with water, as it may result in electric shock. Please do not
tough with wet hands. If there is any failure during charging, please immediately pull up the power plug.
Please guarantee to pull it up from the plug, not from the cable.
Please do not make the charger or cable contact sharp or high temp. articles.Please regularly make sight check to the charger and its cable
If there is obvious damage of the charger or cable, in order to avoid further damage, please do not use the charger any more, and contact for exchange.
Please do not personally repair the battery, charger or cable.Any questions, please contact us.
15
After the bike has been properly assembled according to the instruction, all components are
secured correctly. And you have read this entire manual, turn on the e-bike and select a pedal
assist level to start following the steps below.