Declaration
Speed signal of the torque sensor has
an error
Overcurrent from controller
Communication problem
Brake signal has an error (If brake
sensors are fitted)
Detection circuit for 15V has an error
Detection circuit on the keypad has an error
WDT circuit is faulty
Total voltage from the battery is too high
Total voltage from the battery is too low
Total power from the battery cells is too high
Voltage of the single cell is too high
Temperature from the battery is too high
The temperature of the battery is too low
SOC of the battery is too high
SOC of the battery is too low
Switching detection defect
Electronic derailleur cannot release.
Electronic lock is jammed
Bluetooth module has an error
Troubleshooting
1.Check the connector from the speed
sensor to make sure it is connected
correctly.
2.Check the speed sensor for signs of
damage.
3.If the problem persists, please contact the
Support.
Please contact the Support.
1.Check all connections are correctly
connected.
2.If the error persists, please contact the
Support.
1.Check all connectors.
2.If the error continues to occur, please
con¬tact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support. (only with this
function)
Please contact the Support. (only with this
function)
Please contact the Support. (only with this
function)
Please contact the Support. (only with this
function)
Error
26
27
30
33
35
36
37
41
42
43
44
45
46
47
48
61
62
71
81
21
Summary of Contents for FM9
Page 1: ...Smart EV Moped User Manual Model FM9 EN DE FR IT ES...
Page 2: ......
