1. Charging: Find the charging port on the side frame at the bottom of the battery and
connect to the charger for charging. When the battery is fully charged, the charger light
changes from red to green.
2. Power On/Off: Long press the power button to turn on/off the display power.
3. Display: After the display is turned on, briefly press the power button (<0.5s) to see the
different trip modes. The information displayed will be switched between the daily
kilometers (TRIP) - total kilometers (ODO) - Maximum speed (MAX) - Average speed
(AVG) - Remaining distance (RANGE) - Energy consumption (CALORIES) - Output power
(POWER) - Travel time (TIME).
4. Headlight: By pressing and holding the plus button, the controller will turn on/off the
headlight.
5. PAS Mode: You must turn on the battery to use the e-bike in pedal-assisted mode.
Power assist is triggered when you pedal forward, and stops when you stop pedaling,
sometime with a delay. If no power is needed, turn off the power of the battery.
6. Walk Assist Mode: Long press the “-” button until the walk assist symbol appears. Next
press and hold down the “-” button and the walk assist will activate. The electrical bike
runs at a constant speed of approx. 5 km/h. After releasing the “-” button, the motor stops
automatically and switches back to level 0.
Function introduction:
3
Summary of Contents for FM9
Page 1: ...Smart EV Moped User Manual Model FM9 EN DE FR IT ES...
Page 2: ......
