111
Trendline 3
To add a new balancing configuration to the template group click on
(for
more information see "Add balancing configuration
").
To add a new run up/coast down configuration to the template group, click on
(for more information see "Set up run up/coast down
").
To add a new amplitude/phase configuration to the template group, click on
(for more information see "Set up amplitude/phase configuration
").
With
you can delete the element selected from the list.
You can find more information ab out configuring measurement
points and characteristic values in the chapter "Setting up
configuration".
You can create up to 255 templates per configuration type in a
template group.
Edit template
To edit a template
click on the Planning menu on Template.
Edit the settings as described in "Create new template".
The condition monitoring templates are protected against
accidental editing. If you want to edit a template, click in the
"General configuration" tab on
Unlock template
.
Templates from FAG Industrial Services cannot b e edited.
You can move or delete single template elements:
-
With and you can move a selected element within its level up or down.
-
With
,
and
you can cut, copy and insert an element.
-
With
you can delete a selected element.
Further information in "Tree elements
"
Save configuration as template
If you want to save a configuration from a measurement point as template,
select the measurement point in the Trendline configuration and
click in the
System
menu on
Save configuration as template
.
Enter a name to the configuration, e.g. "Fan" and
69
82
76
43
