77
Trendline 3
is displayed in the
RFID number
field.
Remove RFID
: This option instructs the Detector to cancel the RFID tag
assignment to the measuring point during the next round.
RFID defective
: The Detector has marked the assigned RFID tag as defective.
Change RFID
: This option tells the Detector to replace the assigned RFID tag.
During the next round, you must delete the tag and assign a new one before
you can perform the measurement at this measuring point.
You can only select the statuses that are accessib le as a follow-up
status of the current status.
Further information in the chapter "Automatic assignment of RFID tags to
measuring points
".
Amplitude-Phase settings
Type of vibration unit
: Select
Acceleration
,
Velocity
or
Displacement
.
Peak setting
: Specify here whether the
peak-to-peak
value, the
peak
value or
the root mean square (
RMS
) should be evaluated.
Order
: Select what signal order the Detector should determine (1 = rotational
speed signal, 2 = 1st harmonic, 3 = 2nd harmonic, 4 = 3rd harmonic).
Measuring point tag
: Enter a name for the measuring points. You can change
the standard designation "MP" in the Program settings
. During the
measurement, the Detector adds a consecutively increasing number to this
name to uniquely identify a measuring point. Due to the size of the Detector
display, this name can be a maximum of 15 characters long.
Measurement averaging count
: The Detector averages measured values
during the measurement. Specify how many values are to be used for
averaging.
Rotational speed settings
Enter the
Nominal rotational speed
(in the predefined unit, see "Program
") and the
Max. allowed deviation
in the appropriate input
boxes. Note that a deviation of more than 10% is not possible. If the acquired
speed by the Detector is outside the rotational speed range defined here, the
Detector displays an error message
.
The Detector averages the rotational speed values during the measuring
process. Specify how many rotational speed values are to be used for
averaging at Turning
speed averaging count
. If you enter 20, for example, the
Detector averages the values obtained for rotational speed across 20
revolutions.
54
146
146
263
