109
Trendline 3
4.6.7 Edit / delete manufacturers
Edit manufacturer
Click on
Edit manufacturer
to modify the data for a manufacturer.
Modify the manufacturer data and click on
Next
.
In the next window the Trendline shows your changes and the original data for
an easy compare. Click on
Save
to store your changes in the bearing database
or click on
Back
to change your data.
Delete manufacturer
If you have deleted all bearings from a manufacturer from the bearing database
(see Edit/delete bearings
), you can also remove the manufacturer.
Click
Delete manufacturer.
Then select the manufacture from the
Manufacturer
list and click
Continue.
The manufacturer is then deleted from the bearing database.
You can only delete manufacturers which have b een added
b y
yourself!
4.6.8 Select bearing database
Click in the Bearing database
dialog on
Change database
.
Select the database as described in "Select database"
. The name of the
included bearing database is "cm_bearings".
This opens the bearing database.
4.6.9 Close
To exit the bearing database
click
Close
.
4.7 Template and route planning
Constantly recurring plant structures and measurement tasks can be performed
efficiently with the help of templates and routes.
4.7.1 Template planning
A template has the same layout as a measuring point. As with a measuring point,
time signals can be recorded and different characteristic values set. If you want to
102
105
108
102
93
