10
CAUSE
PROBLEM
SOLUTION
• It is not plugged in.
• There is no electrical current
to the plug because the fuse
has blown or the automatic
power limiter has activated.
• The connection controls are
not on.
• Plug in.
• Change the fuse or reset the
automatic power limiter.
• Switch the controls on.
• The freezer is off level.
• Level it, with the leveller
bases.
• Temperature selection is set
too hot.
• The door is not properly
closed or is opened very
frequently.
• The free space between the
base and the floor or at the
top of the freezer has been
blocked.
• The freezer is exposed to
direct sunlight or a heat
source.
• A large amount of food has
been introduced.
• Set temperature selection to
maximum cold.
• Ensure that the door does not
remain open too long.
• Keep these areas free as
described in the
"Installation" section in this
manual.
• Relocate the freezer or
protect it from these heat
sources.
• Consult the section on
"operation and use of the
freezer".
• The doors are not properly
closed.
• The doors are opened often.
• The food was introduced
recently.
• Temperature selection in a
high position.
• Close the door properly.
• Avoid opening the door
frequently.
• Wait for the appliance to
return to normal.
• Set the temperature switch to
less cold.
The freezer does not work.
The freezer vibrates.
The freezer is not very
effective.
The motor runs permanently.
7. TROUBLESHOOTING
FQ8Y000A7 16/1/04 16:09 Página 48
