CAUSE
PROBLEM
SOLUTION
14
• It is not plugged in.
• There is no electrical current
to the plug because the fuse
has blown or the automatic
power switch has activated.
• The controls are not on.
• Plug in.
• Change the fuse or reset the
automatic power switch.
• Switch the controls on.
• The refrigerator is not prop-
erly level.
• Level the refrigerator prop-
erly, with the leveller bases.
• Temperature selection is set
too hot.
• The door is not properly
closed, is opened frequently
or was left open.
• The space between the re-
frigerator and floor or the
top of the refrigerator has
been covered.
• The refrigerator is exposed
to direct sunlight or a heat
source.
• A large amount of food has
been stored.
• There is something obstruct-
ing the ventilation grills.
• Set temperature selection to
maximum cold.
• Ensure that the door does
not remain open too long.
• Keep these areas free as de-
scribed in the "Installation"
section of this manual.
• Relocate the refrigerator or
protect it from these heat
sources.
• Consult the section on
"Operation and Use of the
Refrigerator".
• Remove any obstacles
blocking the air outlet of the
ventilation grills.
• The doors are not properly
closed.
• The doors are opened often.
• The food was stored recent-
ly.
• Temperature selection is in
the high position.
• Close the door properly.
• Avoid opening the door fre-
quently.
• Wait for the appliance to re-
turn to normal.
• Set the temperature switch
to less cold.
The refrigerator does not oper-
ate
The refrigerator vibrates
The refrigerator or freezer is
not very cold
The motor runs constantly
7. TROUBLESHOOTING
