Panel PC.
CNC 8065
·7·
(R
EF
: 1801)
SOFTWARE OPTIONS.
Some of the features described in this manual are dependent on the acquired software options. The active
software options for the CNC can be consulted in the diagnostics mode (accessible from the task window
by pressing [CTRL] [A]), under software options.
Consult the ordering handbook for information on the software options available for your model.
SOFT ADDIT AXES
Additional shaft.
Add axes to the default configuration.
SOFT ADDIT SPINDLES
Additional spindle.
Add spindles to the default configuration.
SOFT ADDIT TOOL MAGAZ
Additional tool magazine.
Add tool magazines to the default configuration.
SOFT ADDIT CHANNELS
Additional channel.
Add channels to the default configuration.
SOFT 4 AXES INTERPOLATION LIMIT
Limited to 4 interpolated axes.
It limits the number of axes to 4, where the CNC can also
interpolate these at the same time.
SOFT OPEN SYSTEM
Open system.
The CNC is a closed system that offers all the features
needed to machine parts. Nevertheless, at times there are
some customers who use third-party applications to take
measurements, perform statistics or other tasks apart
from machining a part.
This feature must be active when installing this type of
application, even if they are Office files. Once the
application has been installed, it is recommended to close
the CNC in order to prevent the operators from installing
other kinds of applications that could slow the system
down and affect the machining operations.
SOFT DIGITAL SERCOS
Sercos digital bus.
Sercos digital bus.
SOFT EDIT/SIMUL
EDISIMU mode (editing and simulation).
It allows for the editing, modification and simulation of a
part-program.
SOFT DUAL-PURPOSE (M-T)
Dual-purpose machine.
A dual-purpose machine allows for both milling and
turning cycles. On lathes with a Y axis, it allows making
pockets, bosses and even irregular pockets with islands
during milling cycles. Turning cycles can be used by
milling machines which have a rotary axis that functions
as a C axis.
SOFT IEC 61131 LANGUAGE
IEC 61131 language
IEC 61131 is a PLC programming language that is very
popular in alternative markets, which is slowly entering
into the machine-tool market. With this feature, the PLC
may be programmed either in the usual Fagor language
or in IEC 61131 format.
This feature requires the MP-PLUS (83700201)
processor.
SOFT TOOL RADIUS COMP
Compensación de radio.
Tool compensation allows programming the contour to be
machined based on part dimensions of the and without
taking into account the dimensions of the tool that will be
used later on. This avoids having to calculate and define
the tool path based on the tool radius.
SOFT PROFILE EDITOR
Profile editor.
Allows for the part profiles to be edited graphically and to
import dxf files.
Summary of Contents for 8065 M
