47
c. Set the air control to position H (table 3). Depending on the gas to be used.
d. Replace the base.
2. Pilot conversión:
a. Remove the base of the oven.
b. Undo the pilot unit.
c. Remove the pilot injectors and replace with the correct model according to the gas to be
used (table 3).
d. Refasten the pilot unit and replace the base.
4.5.3 Hotplate burner
1. Burner conversion:
a. Undo the control holder panel.
b. Remove the burner injectors and replace with the correct model according to the gas to
be used (table 3).
c. Set the air control to position H (table 3) depending on the gas to be used.
d. Replace the control holder panel.
2. Pilot conversión:
a. Lift the hotplate guide ring.
b. Undo the pilot unit.
c. Remove the pilot injectors and replace with the correct model according to the gas to be
used (table 3).
