Fagor CNC 8058elite T Manual Download

Page: 10 / 90

Probing (·T· model).

CNCelite

8058 8060

8065

ꞏ10ꞏ

. 2106

SOFT CONV USER CYCLES

Option to enable user conversational cycles. The user and
the OEM can add their own canned cycles (user cycles)
using the FGUIM application that comes installed on the
CNC. The application offers a guided way to define a new
component and its softkey menu without having to be
familiar with script languages. User cycles work in a
similar way as Fagor canned cycles.

SOFT PROGTL3

Option to enable the ProGTL3 programming language
(ISO language extension), allowing profiles to be
programmed using a geometric language and without the
need to use an external CAD system. This language can
program lines and circles where the end point is defined
as the intersection of 2 other sections, pockets, ruled
surfaces, etc.

SOFT PPTRANS

Option to enable the program translator, which can
convert programs written in other languages to Fagor ISO
code.

SOFT DMC

Option to enable the DMC (Dynamic Machining Control).
DMC adapts the feedrate during machining to maintain
the cutting power as close as possible to ideal machining
conditions.

SOFT FMC

Option to enable the FMC (Fagor Machining Calculator).
The FMC application consists of a database of materials
to be machined and machining operations, with an
interface to choose suitable cutting conditions for these
operations.

SOFT FFC

Option to enable the FFC (Fagor Feed Control). During
the execution of a canned cycle of the editor, the FFC
function makes it possible to replace the feedrate and
speed programmed in the cycle with the active values of
the execution, which are acted upon by the feed override
and speed override.

SOFT 60/65/70 OPERATING TERMS

Option to enable a temporary user license for the CNC,
which is valid until the date set by the OEM. While the
license is valid, the CNC will be fully operational
(according to the purchased software options).

SOFT FCAS

Option to enable the FCAS (Fagor Collision Avoidance
System). The FCAS option, within the system limitations,
monitors the automatic, MDI/MDA, manual and tool
inspection movements in real time, so as to avoid
collisions between the tool and the machine. The FCAS
option requires that the HD graphics to be active and that
there is a defined a model configuration of the machine
adjusted to reality (.xca file), which includes all its moving
parts.

SOFT GENERATE ISO CODE

ISO generation converts canned cycles, calls to
subroutines, loops, etc. into their equivalent ISO code (G,
F, S, etc functions), so the user can modify it and adapt it
to his needs (eliminate unwanted movements, etc.). The
CNC generates the new ISO code while simulating the
program, either from the DISIMU mode or from the
conversational mode.

SOFT PWM CONTROL

Option to enable PWM (Pulse - Width Modulation) control
on laser machines. This feature is essential for cutting
very thick sheets, where the CNC must create a series of
PWM pulses to control laser power when drilling the initial
point.
This function is only available for Sercos bus control
systems and must also use one of the two fast digital
outputs available from the central unit.

SOFT GAP CONTROL

Option to enable gap control, which makes it possible to
set a fixed distance between the laser nozzle and the
sheet surface with the use of a sensor. The CNC
compensates the difference between the distance
measured by the sensor and the programmed distance
with additional movements on the axis programmed for
the gap.

Software option

Description.