Probing (·T· model).
CNCelite
8058 8060
8065
1.
PREVIOUS NOTIONS
ABOUT THE PR
O
BE.
First and last subroutin
es of the pr
obing cycles.
ꞏ30ꞏ
R
EF
. 2106
1.4
First and last subroutines of the probing cycles.
At the beginning and end of the probing cycles, both ISO and those of the editor, the CNC
executes the following subroutines. The subroutines for the tool calibration cycles and for
the measuring cycles are different.
These subroutines are saved in the folder ..\MTB\Sub. Since they are OEM subroutines,
being the CNC in USER mode, the CNC loads them into RAM memory when starting up the
application. Being the CNC in SETUP mode, the CNC loads these subroutines into RAM
memory the first time it executes them inside the program.
Subroutines and M functions defined in the cycle.
Up to 4 M functions may be defined in each probing cycle to be executed before the cycle
and another 4 M functions to be executed afterwards. All these functions may have a
subroutine associated with them.
W h e n s t a r t i n g t h e e x e c u t i o n , t h e c y c l e e x e c u t e s f i r s t t h e s u b r o u t i n e s
Sub_Probe_Tool_Begin.fst or Sub_Probe_Piece_Begin.fst (accordingly) and then the M-
before functions with their associated subroutines.
At the end of the execution, the cycle executes firsts the M-after functions with their
corresponding associated subroutines and then the subroutines Sub_Probe_Tool_End.fst
or Sub_Probe_Piece_End.fst (accordingly).
The subroutines provided by Fagor offer basic handling of the probes. These subroutines must be
configured by the OEM.
Fagor provides the subroutine Sub_Probe_Tool_Begin.fst associated with probe input 1 and the
subroutine Sub_Probe_Piece_Begin.fst associated with probe input 2.
i
Subroutine.
Properties.
Sub_Probe_Tool_Begin.fst
The CNC executes the subroutine at the beginning of all tool
calibration cycles.
Sub_Probe_Tool_End.fst
The CNC executes the subroutine at the end of all tool calibration
cycles.
Sub_Probe_Piece_Begin.fst
The CNC executes the subroutine at the beginning of all part
measuring cycles.
Sub_Probe_Piece_End.fst
The CNC executes the subroutine at the end of all part measuring
cycles.
Summary of Contents for CNC 8058elite T
