Probing (·T· model).
CNCelite
8058 8060
8065
2.
PRO
B
IN
G.
G1
01/G102. In
clude
/e
xcl
ude the m
easu
ring error in the th
eoretic
al
coordi
nate.
ꞏ38ꞏ
R
EF
. 2106
2.2
G101/G102. Include/exclude the measuring error in the theoretical
coordinate.
The measuring error is the difference between the programmed coordinate and the
coordinate reached by the probe. The measuring error is given in the active units, radius or
diameter.
After probing, the CNC assumes the current axis position as the theoretical position.
Functions G101 and G102 determine whether to consider or ignore the measuring error
when updating the theoretical coordinate.
Influence of the reset, turning the CNC off and of the M30.
Functions G101 and G102 are modal and incompatible with each other. On power-up, after
an M02 or M30 and after an EMERGENCY or a RESET, the CNC maintains the values
programmed with G101.
G 1 0 1
I n c l u d e t h e m e a s u r i n g e r r o r i n t h e t h e o r e t i c a l
coordinate.
When executing this function, the CNC includes the error resulting from the measurement
to set the theoretical axis positions; in other words, the CNC will assume as theoretical axis
position the programmed coordinate (position reached by the probe + the measuring error).
Function G101 must be executed after taking a measurement. The CNC lets program any
axis of the channel in a G101 block even if it has not been involved in the previous
measurement (G100/G103/G104).
The CNC lets make a measurement (G100/G103/G104) on any axis of the channel even
when function G101 is active. The measurement on an axis does not change the G101 of
other axes and, therefore, it does not change its variable (V.)A.MEASIN.xn.
Programming format.
To include the measuring error, program function G101 and then the axes in which to include
the measuring error. For each axis, you must define how many times the measuring error
is added to the coordinate. Usually, the measuring error needs to be included only once.
G101 X..C
G101
Include the measuring error in the theoretical coordinate.
G102
Exclude the measuring error in the theoretical coordinate.
X..C
Axes whose theoretical coordinate includes the measuring error .
G101 X1 Z1
G101 X2
Summary of Contents for CNC 8058elite T
