Probing (·T· model).
CNCelite
8058 8060
8065
3.
CA
NNED CYCLES. ISO CODED PROGRAMMIN
G
.
#PROBE 2
. T
able
to
p p
robe
cal
ibratio
n
ꞏ50ꞏ
R
EF
. 2106
3.2
#PROBE 2. Tabletop probe calibration
This cycle may be used calibrate the sides of the tabletop probe. Once the cycle has ended,
the user must enter the data returned by the cycle into the machine parameters that define
the position of the probe.
The calibration is carried out with a tool of known dimensions.
Requirements prior to the calibration.
To execute the cycle, use a master tool whose dimensions have already been defined in the
tool table. Since the probe needs to be calibrated along the X and Z axes, the location code
of the master tool must be F1, F3, F5 or F7.
Data returned by the cycle after the measurement.
Once the cycle has ended, the CNC returns the real values obtained in the measurement
in the following arithmetic parameters: All the values will be given in absolute coordinates
referred to machine reference zero.
Define the probe position.
Once the values of these parameters and the probe dimensions are known, the user must
calculate the coordinates of the other sides and update the following general machine
parameters.
P298
Real coordinate of the measured side along the abscissa axis.
P299
Real coordinate of the measured side along the ordinate axis.
This value is given in radius.
P297
Real coordinate of the measured side along the axis perpendicular to the plane
(if it has been measured).
This value is given in radius.
PRB1MIN
Minimum probe coordinate along the first axis of the channel.
PRB1MAX
Maximum probe coordinate along the first axis of the channel.
PRB2MIN
Minimum probe coordinate along the second axis of the channel.
PRB2MAX
Maximum probe coordinate along the second axis of the channel.
PRB3MIN
Minimum probe coordinate along the third axis of the channel.
PRB3MAX
Maximum probe coordinate along the third axis of the channel.
Summary of Contents for CNC 8058elite T
