Probing (·T· model).
CNCelite
8058 8060
8065
CANNED CYCLES. CYCLE EDITOR.
4.
T
abl
etop prob
e ca
lib
ra
tion.
ꞏ73ꞏ
R
EF
. 2106
4.3.1
Programming the cycle.
Tool to be calibrated.
ꞏTpꞏ Tool to be used in the calibration.
Number of the tool used to calibrate the tabletop probe.
ꞏDpꞏ Tool offset
Offset of the tool to be calibrated.
Probing movement.
ꞏiconꞏ Axes along which calibration takes place.
This parameter indicates how many sides of the probe will be used for calibration. In a "Plane"
type of axis configuration, two sides of the probe will always be used. In a "Trihedron" type
of axis configuration, it is possible to choose to use either two or three sides of the probe.
ꞏDsꞏ Safety distance.
This parameter only admits positive values greater than 0 (zero). Value defined in radius.
Distance with respect to the point to touch, to which the tool approaches in G00 before
making the probing movement. When calling the cycle, the tool must be located, with respect
to the point to be measured, at a greater distance than this value
ꞏFꞏ Probing feedrate.
This parameter sets the probing feedrate. The rest of the movements will be carried out in
G00.
Probe coordinates.
ꞏiconꞏ Redefine the tabletop probe position.
ꞏPRB1MIN - PRB3MAXꞏ Tabletop probe position.
They are optional parameters that usually need not be defined. On certain machines, due
to lack of repeatability in the mechanical positioning of the probe, the probe must be
calibrated again before each tool calibration. Instead of re-defining the machine parameters
every time the probe is calibrated, those coordinates may be indicated in these parameters.
Parameters PRB1MIN, PRB2MIN and PRB3MIN refer to the minimum coordinates of the
probe on the first axis, second axis and on the axis perpendicular to the plane respectively.
Parameters PRB1MAX, PRB2MAX and PRB3MAX refer to the maximum coordinates of the
probe on the first axis, second axis and on the axis perpendicular to the plane respectively.
Calibration along the abscissa and ordinate axes of the work plane.
Calibration along the abscissa and ordinate axes of the work plane. Additional calibration
along the axis perpendicular to the plane, in the negative direction (Y+ side).
Calibration along the abscissa and ordinate axes of the work plane. Additional calibration
along the axis perpendicular to the plane, in the positive direction (Y- side).
The probe position is assumed from the machine parameters.
The probe position is defined in the cycle.
When selecting this option, the cycle will show the data necessary to define
the probe position.
Summary of Contents for CNC 8058elite T
