Work modes
35
Repositioning the axes.
The CNC allows repositioning the axes either one by
one or in groups. Use the vertical softkeys to select the
axes to be repositioned and press [START]. The CNC
will reposition the axes at the selected point (according
to the softkey selected earlier) at the feedrate set by the
machine manufacturer. Once one axis has reached its
position, the repositioning will no longer be available.
Repositioning the master spindle.
If the status of the master spindle has changed during
the inspection, the softkeys will show the M3, M4, M5 or
M19 function to restore. The spindle turning status may
be restored either together with the repositioning of the
axes or separately. If the spindle was interrupted in a
positioning with M19, repositioning will complete that
positioning.
Resuming the execution of the program.
Once all the axes are repositioned or after canceling
repositioning, press [START] to resume program
execution.
• If tool inspection has ended by repositioning all the
axes, when pressing [START], the CNC completes the
interrupted path and goes on with the rest of the
program.
• If tool inspection has ended after canceling the
repositioning of the axes, when pressing [START], the
axes move from their current position to the end point
of the interrupted path and then the CNC goes on with
the rest of the program.
Summary of Contents for CNC 8060
