Fagor CNC 8065elite T Manual Download

Page: 9 / 128

Remote modules. RIO5, RIOW and RIOR series.

CNCelite

8058 8060
8065 8070

ꞏ9ꞏ

. 2107

SOFT SYNCHRONISM

Option to enable the synchronization of paired axes and
spindles, in speed or position, and through a given ratio.

SOFT KINEMATIC CALIBRATION

Option to enable tool calibration. For the first time, this
kinematics calibration allows for the kinematics offsets to
be calculated using various approximate data and, also,
from time to time to correct any possible deviations
caused by day-to-day machining operations.

SOFT 60 HSSA I MACHINING SYSTEM

Option to enable the HSSA-I (High Speed Surface
Accuracy) algorithm for high speed machining (HSC).
This new HSSA algorithm allows for high speed
machining optimization, where higher cutting speeds,
smoother contours, a better surface finishing and greater
precision are achieved.

SOFT HSSA II MACHINING SYSTEM

Option to enable the HSSA-II (High Speed Surface
Accuracy) algorithm for high speed machining (HSC).
This new HSSA algorithm allows for high speed
machining optimization, where higher cutting speeds,
smoother contours, a better surface finishing and greater
precision are achieved. The HSSA-II algorithm has the
following advantages compared to the HSSA-I algorithm.

• Advanced algorithm for point preprocessing in real

time.

• Extended curvature algorithm with dynamic

limitations. Improved acceleration and jerk control.

• Greater number of pre-processed points.
• Filters to smooth out the dynamic machine behavior.

SOFT TANGENTIAL CONTROL

Option to enable tangential control. "Tangential Control"
maintains a rotary axis always in the same orientation with
respect to the programmed tool path. The machining path
is defined on the axes of the active plane and the CNC
maintains the orientation of the rotary axis along the entire
tool path.

SOFT PROBE

Option to enable functions G100, G103 and G104 (for
probe movements) and probe canned cycles (which help
to measure part surfaces and to calibrate tools). For the
laser model, it only activates the non-cycle function G100.
The CNC may have two probes; usually a tabletop probe
to calibrate tools and a measuring probe to measure the
part.

SOFT FVC STANDARD
SOFT FVC UP TO 10m3
SOFT FVC MORE TO 10m3

Options to enable volumetric compensation. The
precision of the parts is limited by the machine
m a n u f ac t u r i n g t o l e r a n c e s , w e a r, t h e e ff e c t o f
temperature, etc., especially on 5-axis machines.
Volumetric compensation corrects these geometric errors
to a larger extent, thus improving the precision of the
positioning. The volume to be compensated is defined by
a point cloud and for each point the
error to be corrected is measured. When mapping the total
work volume of the machine, the CNC knows the exact
position of the tool at all times.
There are 3 options, which depend on the size of the
machine.

• FVC STANDARD: Compensation for 15625 points

(maximum 1000 points per axis). Quick calibration
(time), but less precise than the other two, but
sufficient for the desired tolerances.

• FVC UP TO 10m3: Volume compensation up to 10 m³.

More accurate than FVC STANDARD, but requires a
more accurate calibration using a Tracer or Tracker
laser).

• FVC MORE TO 10m3: Volume compensation greater

than 10 m³. More accurate than FVC STANDARD, but
requires a more accurate calibration using a Tracer or
Tracker laser.

Software option

Description.