Remote modules. RIO5, RIOW and RIOR series.
CNCelite
8058 8060
8065 8070
RIOR-E-48
I3
2O / RIOR-E
-4
8I32O-ANALOG (CA
NOPEN).
5.
De
scri
pti
on of co
nne
ctors.
ꞏ95ꞏ
R
EF
. 2107
ꞏ I 4 8 ꞏ
A n a l o g i n p u ts a n d o u t p u ts . A n a l o g i n p u ts f o r
temperature sensors.
ꞏS41ꞏ
CAN bus. Address (node) of the element.
The CNC must always occupy position "0" and the rest of the elements of the bus will occupy
consecutive positions starting with 1. In order for any change at the "Address" switch to be
assumed, the CNC must be restarted and the corresponding drive must be reset, however,
we recommend to change the address while the modules and the CNC are off.
The "Address" switch also sets the priority of the group within the bus; the lower the number
the higher the priority. We recommend the keyboard and jog panel to be the last node of the
bus.
ꞏS42ꞏ
CAN bus. Address (node) of the element.
With the ꞏ4ꞏ switch (ADD MSB), the positions or elements integrated in the CAN bus may
be expanded up to 32. Positions 0-15 are selected with ADD MSB=0 and positions 16-31
with ADD MSB=1.
Connector data.
Number of poles.
2x8.
Pitch.
3.5 mm.
Connection technique.
Spring connection.
Minimum/maximum section.
0.2 / 1.5 mm².
Rated current In.
8 A.
Cable data.
Length to be stripped.
7 mm.
"5.7 Connection of the analog inputs/outputs and the PT100
Each one of the elements integrated into the CAN bus is identified
by the 16-position rotary switch (0-15) "Address" (also referred to
as "Node_Select"). With the ADD MSB" switch, the positions or
elements integrated in the CAN bus may be expanded up to 32.
Plug-in part 8x2 pin two-level male Phoenix Contact minicombicon
(3.5 mm pitch).
Pin.
Signal.
Function.
1
GND_AO1
Reference signal. Analog output 1.
2
GND_AO2
Reference signal. Analog output 2.
3
AO1+
Analog output 1.
4
AO2+
Analog output 2.
5
GND_AO3
Reference signal. Analog output 3.
6
GND_AO4
Reference signal. Analog output 4.
7
AO3+
Analog output 3.
8
AO4+
Analog output 4.
9
GND_AI1
Reference signal. Analog input 1.
10
GND_AI2
Reference signal. Analog input 2.
11
AI1+
Analog input 1.
12
AI2+
Analog input 2.
13
GND_PT100_1 Reference signal. Input PT100 1.
14
GND_PT100_2 Reference signal. Input PT100 2.
15
Input PT100 1.
16
Input PT100 2.
1
15
2
16
DS ꞏ4ꞏ
Address (node) of the element.
off
Positions 0-15 within the bus.
on
Positions 16-31 within the bus.
Summary of Contents for CNC 8065elite T
