Fagor CNC 8065elite T Manual Download

Page: 102 / 128

DRAFT

Remote modules. RIO5, RIOW and RIOR series.

CNCelite

8058 8060
8065 8070

OR-E-48I32O /

RIO

R-E-48I

32O

-ANAL

(ET

ERCAT

ific

ꞏ102ꞏ

. 2107

6.1

Specifications.

The machine manufacturer must comply with the EN 60204-1 (IEC-204-1) regulation
regarding electrical shocks in case of defective input/output pins with external power supply
when not plugging the connector before turning the power supply on.

Type.

Description.

General.

• Remote EtherCAT input and output module.
• Dimensions (width x height x depth)

- 150 × 272 × 36.50 mm.
- 5.90" × 10.70" × 1.44".

O p e r a t i n g
conditions.

• Equipment for indoor use in non-hazardous locations, operated by qualified

personnel skilled in its use.

• The equipment must be installed in an enclosure that meets the

requirements described in this manual.

• Equipment designed for use in fixed locations.
• Equipment not suitable for wet areas.
• Never use in explosive environments (dangerous areas).

Regulations.

• It complies with the European directives for electromagnetic compatibility

2014/30/EU and low voltage 2014/35/EU. See the declaration of conformity,
available on our website.

• UL 61010-1 (Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory Use - Part 1: General
Requirements). See the certificate, available on our website.

• IEC/UL 61010-2-201 (Safety requirements for elecrical equipement for

measurement, control and laboratory use. Particular requirements for
control equipment).

• Canadian Standards Associations: CSA C22.2 No. 142 (Process Control

Equipement).

Packaging.

• The package meets the regulation EN 60068-2-32 procedure 1 with a

random fall from a height not greater than 1 m.

Ambient.

• Storage and transport temperature according to IEC 61131-2:

- Between -40 ºC (-40 ºF) and +70 ºC (158 ºF).

• Work temperature according to IEC 61131-2:

- Between 5 ºC (41 ºF) and 55 ºC (131 ºF).

• Temperature outside cabinet according to IEC 61131-2:

- Between 5 ºC (41 ºF) and 45 ºC (113 ºF).

• Temperature inside the enclosure:

- Less than 55 ºC (131 ºF).

• Relative humidity according to IEC 61131-2:

- 20 ~ 85% RH without condensation.

• Maximum work altitude:

- The unit must work properly at 2000 m according to IEC 61131-2.

• Vibration test according to IEC 60068-2-6 with a frequency step of

1 octave/minute (±10%) and a duration of 10 sweeps.
- 5 Hz



8.4 Hz; movement of constant 3.5 mm amplitude (peak value).

- 8.4 Hz



150 Hz; 1g acceleration and constant amplitude (peak value).

• Degree of protection according to EN 60529:

- IPxx.

• Pollution degree 2 according to IEC/UL 61010-1.

Electrical.

• Connection to mains supply: Permanent.
• Operating conditions: Continuous.
• Protection against electric shock: Class III (PE connection is only for

functional earthing).

• OVC I protection level according to IEC/UL 61010-1.

Power supply.

• Use a regulated 24 V DC power supply (between -15% and +20%) and 2 A

(including voltage ripple and noise). The power supply must meet the
UL1950 standard.

Connectivity.

• 2 ports LAN RJ45, for EtherCAT bus.