Quick reference
14
(S
OFT
03.1
X
)
TECHNOLOGICAL FUNCTIONS
Machining feedrate (F)
The machining feedrate may be selected by programmed using the "F" code which remains active until another
value is programmed.
The programming units depend on the active work mode (G93, G94 or G95) and the type of axis being moved (linear
or rotary).
Spindle speed (S)
The spindle speed is selected by program using the spindle name followed by the desired speed.
The speeds of all the spindles of the channel may be programmed in the same block. The programmed speed stays
active until another value is programmed. The programming units will be RPM unless selected otherwise.
If G96 is active, the programming units will be m/min.
Tool number (T)
The "T" code identifies the tool to be selected.
The tools may be in a magazine managed by the CNC or in a manual magazine (referred to as ground tools).
Tool offset number (D)
The tool offset contains the tool dimensions.
Each tool may have several offsets associated with it.
To activate an offset, it must be previously defined. To do that, the CNC offers a section of the tool table where
several offsets may be defined.
Summary of Contents for CNC 8070
Page 1: ...Quick reference SOFT 03 1X REF 0706 CNC 8070...
Page 44: ......
