Interrupting the programme
Throughout the programme, the
drying level pilot light remains on
to indicate the target.
A t t h e b e g i n n i n g o f t h e
programme, the damp option
indicator flashes to indicate the
initial phase.
Once the first level of dampness
has been reached, the pilot light
remains on and the next level
begins to flash, and so on until the
selected option is reached. The
flashing pilot light indicates the
phase of the programme.
Once the selected option has been
reached, all the pilot lights will be
on (not flashing): final phase.
The exact duration of
Programmes 1, 2 and 3
can not be known beforehand. It depends on the
following:
• Amount of garments to be dried and ironed.
• How damp the clothes are.
• The selected options.
The
Driron
itself determines the end of the programme automatically using its electronic sensors.
However, the user can see the approximate phase of the programme at any given time:
Press the general switch or the
button.
If you wish to interrupt the cycle,
to change the option or the
programme, first turn off the
Driron,
select the new option or
programme and press the
button.
If you only want to interrupt the
programme for it to continue later,
press the
button to pause it and
then press the same button when
you wish to continue the cycle.
Obviously, in these cases, you do
not need to open the door.
AND YOU SHOULD NOT OPEN
THE DOOR.
– 72 –
a
b
c
d
11
PROGRAMME CONTROL AND PROGRESS
a
d
c
a
b
