Operation Manual - Page: 1
NV-300T/301T Man: 9910 Soft: 2.xx
1.
UNIT DESCRIPTION
This NV-300T / NV-301T DRO is designed for industrial environments,
especially on lathes
It can display the position of two axes or one axis and the combination of the
second axis with a third one.
1.1
FRONT PANEL
3
rd
display
Each axis display has eight 14.1mm high LEDs and another one for the minus
sign (-).
ABS-This lamp stays on when operating in absolute mode and off when in
incremental mode. To access or quit this mode, use the
key.
Φ
Φ
Φ
Φ
Φ
-
This lamp stays on when operating in diameter mode. In this mode, the
DRO displays twice the actual axis movement. To access it or quit it, use
the
key.
HOLD-
This lamp comes on when "freezing" the axis position by
pressing
and the axis key