Display screen
Direction button
Setting button
Spot cleaning
Along wall cleaning
Speed Adjustment
Auto-cleaning
Time setting
Week setting
Auto recharging
Reservation button
01 . "SPEED" button: Adjust speed with this button according to the room space and personal habit.
(Low speed is more preferred while cleaning small room) Advantages of low speed:
a.Reduce the consumption of battery.
b.Relieve the force of impact during the collision with furniture.
02. "AUTO" button: Start the robot into auto-cleaning mode with this button, it works
until the indicator turned to red and start to search the charging dock with low battery
03."DOCK" button: Use this button to make the robot search charging dock itself.
2.Usage of remote control (without battery )
Usage and function information of remote control:
Function
Function Instruction
clean
Switch on the robot and press "clean" button,it starts work.
Current time and
week setting
7.Switch on the robot.
8.Press the time setting button "clock" on remote control, after the current hour 88: flickers, then
use
“▲▼”buttons to set hours.
9.Press”
◀
▶
”to change between hour and minute, after the minute :88 flickers, then
use
”▲▼”buttons to set minutes.
10.Press "week" button on remote control to get into week setting status.
11.Then use
“▲▼”buttons to choose from 1-7 and set current week.
12.After finished setting, press "clock" button on remote control to confirm and exist.
Reservation time
and
week setting
2.Switch on the robot.
2.Press button "plan" on remote control, after the reservation hour 88: flickers,then use
“▲▼”buttons to to reserve hours.
3.Press”
◀
▶
”to change between hour and minute, after the minute :88 flickers,then
use
”▲▼”buttons to reserve and set minutes.
4.Press "week" button on remote control to get into week setting status. Then use
“▲▼”
buttons to choose from 1-7 and reserve and set week.
5.Press”
◀
▶
” buttons to confirm week reservation information,select "ON" to execute
reservation setting, select "OFF" to cancel reservation setting.
6.After finished setting, press "appt" button on remote control to confirm reservation.
7.Press "plan" button on remote control to exist reservation setting.
8.After existed, aim the remote control to robot and press "appt" button to input reservation data
into robot.
9.Reservation setted successfully after received voice response.
During the standby or operating status of robot, press this button to start search and connect
charging stock for self-charging, and press it again to stop charging.
speed
"SPEED" button: Adjust speed with this button according to the room space and personal habit.
Forward
▲button
Robot walks and cleans forward after pressed this button, and stop automatically if there is
obstacle or stair in front.
Backward
▼button
Press this button once, robot walks backward for a certain distance and stop.
Turn left
◀
button
Press this button once, robot turns left a little and stop.
Turn right
Press this button once, robot turns right a little and stop.
