3-phase servomotors. FKM
3.
3-
PHASE SERVOM
O
TORS. FKM
Ro
ta
ry con
nectors
172
· 106 ·
Ref.2105
FXM|FKM
SERVOMOTOR
3.5
Rotary connectors
FKM1 series
In the FKM1 series, the power connector and the feedback connector are
built into the end of the cables leaving through the gland from the
servomotor itself. The approximate length of these cables is 1 m. For this
series, it is not appropriate to consider rotating connectors.
FKM2/4/6/8/9 series
On the FKM2/4/6/8/9 series, the power connectors and those of feedback
signals may be rotated making it easier to connect the cable when the
installation conditions so require. The possible rotating angles are:
WARNING.
Do not remove the locking screws of any connector.
F- 3/5
Connectors on the end of the cables leaving the servomotor through the
gland.
F- 3/6
Rotary connectors.
Connector
SERVOMOTOR
Amax Hmax
Power ·1·
FKM2/4/6
150°
180°
Signal ·2·
FKM2
150°
180°
FKM4
115°
110°
FKM6
110°
105°
Note.
Certain positions cannot be reached
by rotating with the based mounted.
Approx. max. rotating torque.
8 N·m
Only 5 rotations are allowed in order to
keep the degree of protection.
Connector
SERVOMOTOR
Amax Hmax
Power ·1·
FKM8
200°
110°
FKM9
200°
110°
Signal ·2·
FKM8
110°
105°
FKM9
110°
105°
Note.
Certain positions cannot be reached
by rotating with the based mounted.
Approx. max. rotating torque.
8 N·m
Only 5 rotations are allowed in order to
keep the degree of protection.
H
A
H
A
(1)
(2)
H
A
A
H
(1)
(2)
MANDATORY.
Do not try to exceed the indicated rotating angle values. We recommend
to rotate both connectors only when necessary and very seldom.
Remember that the more often it is rotated the less torque will be needed
to rotate it.
