3-phase servomotors. FKM
3.
3-
PHASE SERVOM
O
TORS. FKM
Ro
ta
ry con
nectors
172
· 108 ·
Ref.2105
FXM|FKM
SERVOMOTOR
FKM8/V series
On the FKM8/V series, the power connectors and those of the fan may be
rotated making it easier to connect the cable when the installation
conditions so require. But not so the feedback signal connector that must
be kept fixed in the indicated position:
F- 3/8
Rotating connectors ·1· and ·3·.
Keep the connector ·2· fixed in the indicated position.
A
H
FIXED
A
H
Connector
Servomotor
Amax
Hmax
Power ·1·
FKM8/V
200°
110°
Signal ·2·
FKM8/V
Keep it fixed in the position
shown in the image
Fan ·3·
FKM8/V
150°
180°
Note.
Certain positions
cannot be reached by
rotating with the based
mounted.
Approx. max. rotating
torque.
8 N·m
O n l y 5 r o t a t i o n s a r e
allowed in order to keep
the degree of protection.
(1)
(2)
(3)
MANDATORY.
Do not try to exceed the indicated rotating angle values. We recommend
to rotate both connectors only when necessary and very seldom.
Remember that the more often it is rotated the less torque will be needed
to rotate it.
Remember to keep the feedback connector ·2· fixed in the position shown
in the image.
INFORMATION.
Remember that the feedback base connector ·2· is hidden under the lid.
Remove the top lid of the servomotor to get to it.
i
Note.
The corresponding cable (not another one) must be plugged in
each connector. Remember that each cable has a specific flexibility and,
therefore, when rotating the with the cable connected, its maximum
bending radius must not be exceeded connector; this maximum bending
radius is given in the corresponding mechanical characteristics tables of
the cables, see section
of chapter
of
this manual.
